1. Coalescence Separator from concrete BIOSEP-C
2. Coalescence Separator from concrete with sedimentation basin BIOSEP-OC
3. Coalescence Separator from concrete with a BY-PASS BIOSEP-CB
4. Coalscence Separator from concrete with a BY-PASSEM and a sedimentation basin BIOSEP-OCB
5. Coalescence Separator from GRP BIOSEP-G
6. Coalescence Separator from GRP, with a sedimentation basin BIOSEP-OG
7. Coalescence Separator from GRP, with a BY-PASS BIOSEP-GB
8. Coalescence Separator from GRP, with a BY-PASS and a sedimentation basin BIOSEP-OGB
9. Coalescence Separator from PEHD BIOSEP-P
10. Coalescence Separators from PEHD with a sedimentation basin BIOSEP-OP
11. Coalescence Separator from PEHD with a sedimentation basin and a pump chamber BIOSEP-OP- KP
12. Concrete Sedimentation basin BIOS-C
13. Sedimentation Basin from GRP BIOS-G

Oil separators, sedimentation basins

Destination

Biocent petroleum product separators are flow-through apparatus for burrying in the ground or free- standing. They are either with sedimentation basins or without. Separators are devices with construction allowing to separate and storage light liquids, and oils from sewage. They are used to puryfy rainwater and thawing water from the contaminations in roads, highways, parking lots,storage buildings, fuel distribution points but also process water from car washes and car workshops.

Operating principles

Coalescence separators operate on principle of gravitational sedimentation and flotation supported by coalescence phenomena - connecting smaller particles of oil into bigger ones. Sewage contains mineral suspended matter which sediments due to the sedimentation process and filtration through coalescence matter. The process of keeping and sewage purification takes place in the separation part. Separated bigger particles float towards the surface of the liquid and create an oil layer while the sewage is drained away through the siphon at the outlet.

Additional equipment

Coalescence Separator from concrete BIOSEP-C

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• Coalescence-type filter and automated sealing
• The body of the tank: reinforced concrete minimal class B45
• Sulfate-resistant concrete C45/55
• Concrete absorbability < 5%
• Concrete tightness: W10
• Freeze-thaw resistance F 150
• Equipped with cast-iron hatches cl. C250 or D400

MODEL	Flow Qnom	OUTSIDE DIAMETER J	INSIDE DIAMETER I	INLETSLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-C 4	4	1300	1000	640	610	1350	160	360
BIOSEP-C 6	6	1300	1000	840	810	1550	160	520
BIOSEP-C 8	8	1300	1000	1040	1010	1750	160	675
BIOSEP-C 10	10	1300	1000	1240	1210	1950	160	830
BIOSEP-C 15	15	1500	1200	1300	1270	2050	200	1265
BIOSEP-C 20	20	1500	1200	1600	1570	2350	200	1605
BIOSEP-C 30	30	1800	1500	1485	1455	2350	315	2300
BIOSEP-C 40	40	1800	1500	1985	1955	2850	315	3190
BIOSEP-C 50	50	2300	2000	1485	1455	2350	315	4100
BIOSEP-C 60	60	2300	2000	1985	1955	2850	315	5670
BIOSEP-C 80	80	2800	2500	1485	1455	2350	315	6400
BIOSEP-C 100	100	2800	2500	1900	1870	2850	400	8440

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-C Specification sheet BIOSEP-C Declaration of the use value

Coalescence Separator from concrete with sedimentation basin BIOSEP-OC

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• Coalescence-type filter and automated sealing
• The body of the tank: reinforced concrete minimal class B45
• Sulfate-resistant concrete C45/55
• Concrete absorbability < 5%
• Concrete tightness: W10
• Freeze-thaw resistance F 150
• Equipped with cast-iron hatches cl. C250 or D400

MODEL	FLOW Qnom	BASIN CAPACITY	OUTSIDE DIAMETER J	INSIDE DIAMETER I	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
PN-EN 858-2 NS*100S - sewage with small amount of sludge e.g. roofed petrol stations
BIOSEP-OC 3/300	3	300	1300	1000	940	910	1650	160	600
BIOSEP-OC 6/600	6	600	1300	1000	1640	1610	2350	160	1150
BIOSEP-OC 8/800	8	800	1500	1200	1500	1470	2250	200	1490
BIOSEP-OC 10/1000	10	1000	1500	1200	1900	1870	2650	200	1945
BIOSEP-OC 15/1500	15	1500	1800	1500	2100	2070	1850	200	3400
BIOSEP-OC 20/2000	20	2000	2300	2000	1600	1570	2350	200	4460
BIOSEP-OC 10/1000	10	1000	1500	1200	1772	1742	2500	160	1800
BIOSEP-OC 25/2500	25	2500	2300	2000	1600	1570	2350	200	4500
BIOSEP-OC 30/3000	30	3000	2300	2000	1985	1955	2850	315	5700
BIOSEP-OC 40/4000	40	4000	2800	2500	1985	1955	2850	315	8868
BIOSEP-OC 50/5000	50	5000	2800	2500	1985	1955	2850	315	9000
BIOSEP-OC 60/6000	60	6000	2800	2500	2485	2455	3350	315	11310
PN-EN 858 NS*200S - sewage with medium amount of sludge e.g. hand carwashes, wastewater from garages, parking lots, non-roofed petrol stations
BIOSEP-OC 3/600	3	600	1300	1000	1340	1310	2050	160	910
BIOSEP-OC 6/1200	6	1200	1500	1200	1640	1610	2350	160	1650
BIOSEP-OC 8/1600	8	1600	1800	1500	1600	1570	2350	200	2510
BIOSEP-OC 10/2000	10	2000	1800	1500	2100	2070	2850	200	3400
BIOSEP-OC 15/3000	15	3000	2300	2000	1600	1570	2350	200	4460
BIOSEP-OC 20/4000	20	4000	2300	2000	2100	2070	2850	200	6030
BIOSEP-OC 25/5000	25	5000	2800	2500	1600	1570	2350	200	6970
BIOSEP-OC 30/6000	30	6000	2800	2500	1985	1955	2850	315	8860
BIOSEP-OC 40/8000	40	8000	2800	2500	2485	2455	3350	315	11315
PN-EN 858-2 NS*300S - sewage with big amount of sludge e.g. automated car wash, yards for washing trucks and heavy equipment
BIOSEP-OC 3/900	3	900	1500	1200	1140	1110	1850	160	1085
BIOSEP-OC 6/1800	6	1800	1800	1500	1640	1610	2350	160	2580
BIOSEP-OC /2500	8	2500	1800	1500	2100	2070	2850	200	3400
BIOSEP-OC 10/3000	10	3000	2300	2000	1600	1570	2350	200	4460
BIOSEP-OC 15/4500	15	4500	2300	2000	2100	2070	2850	200	6030
BIOSEP-OC 20/6000	20	6000	2800	2500	2100	2070	2850	200	9420

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions

BIOSEP-OC Specification sheet BIOSEP-OC Declaration of the use value

Coalescence Separator from concrete with a BY-PASS BIOSEP-CB

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• Coalescence-type filter and automated sealing
• The body of the tank: reinforced concrete minimal class B45
• Sulfate-resistant concrete C45/55
• Concrete absorbability < 5%
• Concrete tightness: W10
• Freeze-thaw resistance F 150
• Equipped with cast-iron hatches cl. C250 or D400

MODEL	FLOW Qnom	MAX.FLOW Qmax	OUTSIDE DIAMETER J	INSIDE DIAMETER I	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l/s]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-CB 3/30	3	30	1300	1000	600	580	1350	200	340
BIOSEP-CB 6/60	6	60	1300	1000	800	765	1550	200	480
BIOSEP-CB 8/80	8	80	1500	1200	750	725	1550	250	650
BIOSEP-CB 10/100	10	100	1500	1200	950	915	1750	250	865
BIOSEP-CB 15/150	15	150	1500	1200	1285	1260	2150	315	1255
BIOSEP-CB 20/200	20	200	1800	1500	985	935	1850	315	1400
BIOSEP-CB 30/300	30	300	1800	1500	1400	1370	2350	400	2150
BIOSEP-CB 40/400	40	400	2300	2000	1300	1265	2350	500/400	3500
BIOSEP-CB 60/600	60	600	2300	2000	1800	1755	2850	500	5040
BIOSEP-CB 70/700	70	700	2800	2500	1300	1225	2350	500	5280
BIOSEP-CB 90/900	90	900	2800	2500	1670	1630	2850	630	7260

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-CB Specification sheet BIOSEP-CB Declaration of the use value

Coalscence Separator from concrete with a BY-PASSEM and a sedimentation basin BIOSEP-OCB

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• Coalescence-type filter and automated sealing
• The body of the tank: reinforced concrete minimal class B45
• Sulfate-resistant concrete C45/55
• Concrete absorbability < 5%
• Concrete tightness: W10
• Freeze-thaw resistance F 150
• By-pass tenfold
• Equipped with cast-iron hatches cl. C250 or D400

MODEL	FLOW Qnom	MAX.FLOW Qmax	BASIN CAPACITY	OUTSIDE DIAMETER J	INSIDE DIAMETER I	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-OCB 3/30/300	3	30	300	1300	1000	900	880	1650	200	570
BIOSEP-OCB 6/60/600	6	60	600	1300	1000	1600	1565	2350	200	1110
BIOSEP-OCB 8/80/800	8	80	800	1500	1200	1450	1425	2250	250	1440
BIOSEP-OCB 10/100/1000	10	100	1000	1500	1200	1850	1815	2650	250	1880
BIOSEP-OCB 15/150/1500	15	150	1500	1800	1500	1900	1880	2850	400/315	3060
BIOSEP-OCB 20/200/2000	20	200	2000	2300	2000	1400	1380	2350	400/315	3860
BIOSEP-OCB 30/300/3000	30	300	3000	2300	2000	1900	1860	2850	400	5400
BIOSEP-OCB 40/400/4000	40	400	4000	2800	2500	1800	1775	2850	500/400	7980
BIOSEP-OCB 55/550/5500	55	550	5500	2800	2500	2300	2250	3350	500	9900
BIOSEP-OCB 60/600/6000	60	600	6000	2800	2500	2300	2245	3350	500	10300
BIOSEP-OCB 70/700/7000	70	700	7000	2800	2500	2670	2645	3850	630/500	12250
PN-EN 858-2 NS*200S - sewage with medium amount of sludge e.g. hand carwashes, wastewater from garages, parking lots, non-roofed petrol stations
BIOSEP-OCB 3/30/600	3	30	600	1300	1000	1300	1280	2050	200	890
BIOSEP-OCB 6/60/1200	6	60	1200	1500	1200	1700	1660	2450	200	1710
BIOSEP-OCB 8/800/1600	8	80	1600	1800	1500	1550	1520	2350	250	2420
BIOSEP-OCB 10/100/2000	10	100	2000	1800	1500	2050	2010	2850	250	3290
BIOSEP-OCB 15/150/3000	15	150	3000	2300	2000	1485	1450	2350	315	4080
BIOSEP-OCB 20/200/4000	20	200	4000	2300	2000	1900	1880	2850	400/315	5440
BIOSEP-OCB 30/300/6000	30	300	6000	2800	2500	1900	1855	2850	400	8400
BIOSEP-OCB 40/400/8000	40	400	8000	1800	2500	2400	2315	3350	400	10630
PN-EN 858-2 NS*300S - sewage with big amount of sludge e.g. automated car wash, yards for washing trucks and heavy equipment
BIOSEP-OCB 3/30/900	3	30	900	1500	1200	1200	1180	1950	200	1165
BIOSEP-OCB 6/60/1800	6	60	1800	1800	1500	1550	1530	2350	250/200	2440
BIOSEP-OCB 8/80/2400	8	80	2400	1800	1500	1985	1965	2850	315	3200
BIOSEP-OCB 10/100/3000	10	100	3000	2300	2000	1485	1460	2350	315	4130
BIOSEP-OCB 15/150/4500	15	150	4500	2300	2000	1985	1950	2850	315	5665
BIOSEP-OCB 20/200/6000	20	200	6000	2800	2500	1800	1780	2850	500	8000

BIOSEP-OCB Specification sheet BIOSEP-OCB Declaration of the use value

Coalescence Separator from GRP BIOSEP-G

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of poliester reinforced with glass fibre from orthophthalic resin
• Coalescence-type filter and automated sealing
• Instalation: Underground / overground (freestanding)
• The cover is made of poliester

MODEL	FLOW Qnom	DIAMETER J	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[mm]	[mm]	[mm]	[mm]	[mm]	[l]
BIOSEP-G 5	5	1000	590	570	900	160	450
BIOSEP-G 7	7	1000	840	820	1150	160	650
BIOSEP-G 10	10	1000	1250	1230	1520	200	950
BIOSEP-G 15	15	1000	1800	1780	2150	250	1400

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-G Specification sheet BIOSEP-G Declaration of the use value

Coalescence Separator from GRP, with a sedimentation basin BIOSEP-OG

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of poliester reinforced with glass fibre from orthophthalic resin
• Coalescence-type filter and automated sealing
• Instalation: Underground / overground (freestanding)
• The cover is made of poliester

MODEL	FLOW Qnom	BASIN CAPACITY	DIAMETER D	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[l]
BIOSEP-OG 1,5/320	1,5	320	1000	590	580	900	160	450
BIOSEP-OG 2/300	2	300	1000	590	580	900	160	450
BIOSEP-OG 2/500	2	500	1000	840	830	1150	160	650
BIOSEP-OG 3/350	3	350	1000	800	790	1150	200	650
BIOSEP-OG 3/700	3	700	1000	1250	1240	1520	200	1000
BIOSEP-OG 6/900	6	900	1000	1850	1840	2150	200	1450

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-OG Specification sheet BIOSEP-OG Declaration of the use value

Coalescence Separator from GRP, with a BY-PASS BIOSEP-GB

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of poliester reinforced with glass fibre from orthophthalic resin
• Coalescence-type filter and automated sealing
• By-pass tenfold
• Instalation: Underground / overground (freestanding)
• The cover is made of poliester

MODEL	FLOW Qnom	MAX.FLOW Qmax	DIAMETER D	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l/s]	[mm]	[mm]	[mm]	[mm]	[mm]	[l]
BIOSEP-GB 4,5/45	4,5	45	1000	550	530	900	200	450
BIOSEP-GB 7/70	7	70	1000	800	760	1150	200	600
BIOSEP-GB 10/100	10	100	1000	1200	1180	1520	200	590

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-GB Specification sheet BIOSEP-GB Declaration of the use value

Coalescence Separator from GRP, with a BY-PASS and a sedimentation basin BIOSEP-OGB

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of poliester reinforced with glass fibre from orthophthalic resin
• Coalescence-type filter and automated sealing
• By-pass tenfold
• Instalation: Underground / overground (freestanding)
• The cover is made of poliester

MODEL	FLOW Qnom	MAX.FLOW Qmax	BASIN CAPACITY	DIAMETER D	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN	SEPARATOR ACTIVE CAPACITY
	[l/s]	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[l]
BIOSEP-OGB 1,5/15/300	1,5	15	300	1000	590	570	900	160	450
BIOSEP-OGB 2/20/250	2	20	250	1000	590	560	900	160	450
BIOSEP-OGB 2/20/450	2	20	450	1000	800	770	1150	200	600
BIOSEP-OGB 3/30/350	3	30	350	1000	800	790	1150	200	620
BIOSEP-OGB 3/30/700	3	30	700	1000	1250	1230	1520	200	970
BIOSEP-OGB 6/60/900	6	60	900	1000	1850	1800	2150	200	1420

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-OGB Specification sheet BIOSEP-OGB Declaration of the use value

Coalescence Separator from PEHD BIOSEP-P

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of polythene, or steel on reqest
• Coalescence-type filter and automated sealing
• Instalation: Underground / overground (freestanding)
• The cover is made of PEHD

MODEL	FLOW Qnom	TOTAL ACTIVE CAPACITY	LENGTH L	WIDTH S	TOTAL HEIGHT H	INLET DIAMETER DN	INLET SLOT HEIGHT H1	INLET SLOT HEIGHT H2
	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-P4	4	350	920	780	820	160	590	570
BIOSEP-P6	6	480	1270	780	820	160	590	570
BIOSEP-P7	7	550	1420	780	820	160	590	570
BIOSEP-P11	11	900	1480	880	1020	160	790	770
BIOSEP-P13	13	1100	1480	880	1200	160	970	950

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-P Specification sheet BIOSEP-P Declaration of the use value

Coalescence Separators from PEHD with a sedimentation basin BIOSEP-OP

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of polythene, or steel on reqest
• Coalescence-type filter and automated sealing
• Instalation: Underground / overground (freestanding)
• The cover is made of PEHD

MODEL	Flow Qnom	BASIN CAPACITY	LENGTH L	WIDTH S	TOTAL HEIGHT H	INLET DIAMETER DN	INLET SLOT HEIGHT H1	INLET SLOT HEIGHT H2
	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-OP 1,5/150	1,5	150	920	780	820	160	590	570
BIOSEP-OP 1,5/300	1,5	300	1270	780	820	160	590	570
BIOSEP-OP 3/300	3	300	1420	780	820	160	590	570
BIOSEP-OP 3/600	3	600	1480	880	1020	160	790	770
BIOSEP-OP 6/600	6	600	1480	880	1200	160	970	950

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOSEP-OP Specification sheet BIOSEP-OP Declaration of the use value

Coalescence Separator from PEHD with a sedimentation basin and a pump chamber BIOSEP-OP-KP

• Separators in compliance with PN-EN 858-1:2005 + PN-EN 858-2:2003
• This fixture is made of polythene, or steel on reqest
• Coalescence-type filter and automated sealing
• Pump chamber
• Instalation: Underground / overground (freestanding)

MODEL	FLOW Qnom	BASIN CAPACITY	LENGTH L	WIDTH S	TOTAL HEIGHT H	INLET DIAMETER DN	INLET SLOT HEIGHT H1
	[l/s]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOSEP-OP-KP 1,5/150	1,5	150	1430	780	700	160	490
BIOSEP-OP-KP 1,5/300	1,5	300	1480	880	870	160	660
BIOSEP-OP-KP 3/300	3	300	1480	880	920	160	690
BIOSEP-OP-KP 3/600	3	600	2030	880	920	160	690
BIOSEP-OP-KP 6/600	6	600	2140	880	1020	160	790

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions

BIOSEP-OP-KP Specification sheet BIOSEP-OP-KP Declaration of the use value

Concrete Sedimentation basin BIOS-C

• Reinforced concrete tank C35/45
• Inspection opening 600 mm equipped with a cast-iron hatch class C250 or D400
• Inlet and outlet slot with a leakproof passage
• Inlet and outlet deflector

MODEL	ACTIVE CAPACITY	OUTSIDE DIAMETER J	INSIDE DIAMETER I	INLET SLOT HEIGHT E	OUTLET SLOT HEIGHT S	TOTAL HEIGHT H	INLET SLOT DIAMETER DN
	[l]	[l]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOS-C 1,0	1000	1300	1000	1455	1425	2005	110-250
BIOS-C 1,5	1500	1500	1200	1510	1480	2060	110-250
BIOS-C 2,0	2000	1500	1200	1950	1920	2500	260-315
BIOS-C 3,0	3000	1800	1500	1880	1850	2430	160-400
BIOS-C 4,0	4000	2300	2000	1455	1425	205	160-400
BIOS-C 5,0	5000	2300	2000	1775	1745	2325	200-500
BIOS-C 6,0	6000	2300	2000	2090	2060	2640	200-500
BIOS-C 8,0	8000	2800	2500	1810	1780	2360	200-630
BIOS-C 10	10000	2800	2500	2220	2190	2770	200-500
BIOS-C 12	12000	2800	2500	1880	1850	2430	200-800
BIOS-C 15	15000	3300	3000	2300	2270	2850	200-400

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions

BIOS-C Specification sheet BIOS-C Declaration of the use value

Sedimentation Basin from GRP BIOS-G

• This fixture is made of poliester reinforced with glass fibre from orthophthalic resin
• Instalation: Underground / overground (freestanding)
• The cover is made of poliester
• Inlet and outlet slot PVC

MODEL	VOLUME	CAPACITY J	INLET HEIGHT E	OUTLET HEIGHT S	TOTAL HEIGHT H	INLET DIAMETER DN
	[l]	[mm]	[mm]	[mm]	[mm]	[mm]
BIOS-G 0,5	500	1000	480	470	900	110/160
BIOS-G 0,7	700	1000	730	720	1150	110/160
BIOS-G 1,0	1000	1000	1100	1090	1520	160/200
BIOS-G 1,5	1500	1000	1730	1720	2150	160/200

Other dimensions and flows can be aquired if arranged beforehand. Please contact our office if you need technical documentation.
Bearing in mind the constant quality improvement of our products, Biocent reserves the right to alter the dimensions of the products as well as adapting them to the installation conditions.

BIOS-G Specification sheet BIOS-G Declaration of the use value

We offer various models of equipment for the metalworking and pretreatment industries. They have different parameters, so you can easily select the device that fits your needs precisely. For example, some separators don't have to be installed underground – they are designed to be freestanding overground as well. With these machines, you will effectively avoid solid and liquid contamination by substances like tramp oil. We manufacture our products with durable materials to make them reliable and long-lasting.

Professional separators are necessary to use for many different reasons. In metalworking and pretreatment industries they are absolutely crucial for the companies to be able to reduce their negative impact on the environment. Solid and liquid contamination cannot be transported directly into drainage systems. Tramp oils and various other substances can seriously damage their overall effectiveness and efficiency. Ecological aspects are definitely worth considering before the purchase of a hydrocarbon separator.

You should also avoid solid and liquid contamination because it can cause additional, unnecessary costs. The tramp oil circulating within the metalworking or pretreatment systems worsens their performance. The maintenance services need to be done more often to make the devices work reliably. The repairs stretch endlessly and affect the production industries' results. It's also important to know that the company that puts contaminated water in approved discharge points can even be fined for the pollution.

Biocent – high-quality oil separators and sedimentation basins

If you want to deal with solid and liquid contamination effectively, Biocent can help you with this task. We produce the best hydrocarbon separators for metalworking and pretreatment industries and over the years we gained much experience working with various clients. We will ensure that the tramp oil is not a problem for you anymore. Contact us now – we'll provide you with the details of future cooperation!